DSC Power608 Especificações descarregar pdf (Página 47)

ASCII Characters

032

064 176

240

033

225

241

034

035

036

228

244

038

230

246

039

231

040

248

041

249

042

058

234

043

059

123

044

060

124

236

045

061

093

125

253

046

062

094

126

238

047 063

095

127

239

255

254

[68] Sixth User Display Mask

Default Option ON OFF

OFF I_______I 1 Occupancy Mode Auxiliary Prompt ON Occupancy Mode Auxiliary Prompt OFF

OFF I_______I 2 Occupancy Mode Day Prompt ON Occupancy Mode Day Prompt OFF

OFF I_______I 3 Occupancy Mode Away Prompt ON Occupancy Mode Away Prompt OFF

OFF I_______I 4 Occupancy Mode Night Prompt ON Occupancy Mode Night Prompt OFF

OFF I_______I 5-8 For Future Use

[97] View Software Version

[98] Initiate Global Label Broadcast

All LCD programming is done per keypad. If more than one LCD keypad are present on the system, and the PC5400 receives

labels, labels programmed at one keypad can be broadcast to all other LCD keypads. Perform the following procedure in order

to broadcast labels:

Step 1 - Program one LCD keypad completely.

Step 2 - Make sure all LCD keypads are connected to the Keybus.

Step 3 - Enter Installer’s Programming, then enter Section [98] at the keypad that was programmed. The keypad will now broadcast

all the information programmed to all the other LCD keypads on the system.

Step 4 - When the keypad is finished press the [#] key to exit.

If you have an LCD5500Z keypad with software version 2.0, the label for Command Output #4 will not be broadcast

when a Global Label Broadcast is initiated. You will need to program the label for Command Output #4 at each

LCD5500 keypad.

If you install any LCD5500 V1.X keypads, after you download the labels (for zones, partitions, etc.) to the keypads,

you may have to power the keypads down and then up, and re-select the keypad language, for the keypads to

display properly.

[99] Reset LCD EEPROM to Factory Defaults

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Comentários a estes Manuais

Sem comentários

DSC Power608 Especificações Página 47

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DSC Power608