DSC Power608 Especificações descarregar pdf (Página 11)

KEYPADVCOMMANDS

Brightness Control

You can select from 10 different backlighting levels. Use the

arrow keys (< >) to scroll to the desired backlighting level. Press

[#] to exit.

Contrast Control

You can select from 10 different display contrast levels. Use the

arrow keys (< >) to scroll to the desired contrast level. Press [#]

to exit.

Keypad Sounder Control

You can select from 21 different keypad tones. Use the arrow

keys (< >) to scroll to the desired keypad sound level and press

[#] to exit. This feature can be accessed on LED keypads by

pressing and holding the [✱]

key.

[✱]

[7] Command Output Functions

The user can activate programmable output functions using the

[✱][7][1-2] commands. The outputs may be activated when the

system is either armed or disarmed.

[✱] [7] [1] – Command Output Option #1:

Press [

✱]

[7] [1] [Access Code, if required] to activate outputs

programmed as PGM output option [19]. This output can be

used for operating devices such a garage door opener, lighting

or door strikes.

[✱] [7] [2] – Command Output Option #2:

Press [

✱]

[7] [2] [Access Code, if required] to activate all outputs

programmed as

one of

PGM output options [03] or [20].

Special Note: Traditionally, [✱] [7] [2] has been reserved for

resetting smoke detectors. Smoke detectors should now be

programmed as output [03] “Sensor Reset”. If using output

option [03],

do not

program [20] Command Output Option #2.

Please see Section 5.11 “PGM Output Options” for more

information.

[✱]

[8] Installer’s Programming

Enter [✱]

[8] followed by the Installer’s Code to access Installer’s

Programming. See sections 4 and 5 for more information.

[✱]

[9] Arming Without Entry Delay

When the system is armed with the [

✱]

[9] command, the panel

will cancel the entry delay. Once the exit delay has expired,

Delay 1 and Delay 2 type zones will be instant and Stay/Away

zones will be bypassed (see Section 5.2 – “Zone Programming”).

A valid access code must be entered after pressing [

✱]

[9].

[✱]

[0] Quick Arm

If the Quick Arm option is enabled, enter [

✱]

[0] to arm the panel

without an access code (See Section 5.17 “Arming / Disarming

Options”).

Quick Arm cannot be used to cancel auto arm.

[✱]

[0] Quick Exit

The Quick Exit function, if enabled, will allow someone to leave

an armed premises through a Delay type zone without having to

disarm and re-arm the system (See Section 5.17 “Arming /

Disarming Options”).

When [

✱]

[0] is entered, the panel will provide a two minute

window for the user to exit the premises. During this time, the

panel will ignore

only one

activation of a Delay zone. When the

Delay zone is secured, the panel will end the two minute quick

exit delay.

If a second Delay zone is tripped, or if the zone is not restored

after two minutes, the panel will begin the entry delay.

If the Exit Delay is in progress, performing a Quick

Exit will not extend the Exit Delay.

3.5 Function Keys

There are five function keys on each keypad labelled Stay,

Away, Chime, Reset and Exit. Each of these keys is programmed

by default to perform one of the functions described below.

Press and hold the appropriate key for two seconds to activate

a function.

On the PC1555RKZ keypad, use number keys 1 - 5

for the function keys.

“Stay” – (03) Stay Arm

The system will arm in the Stay mode (see section 3.2). Enable

the Quick Arm feature (programming section [015], option [4])

to have this key function without the need to enter an access

code. If Quick Arm is not enabled, the user will have to enter an

access code before the system will stay arm.

“Away” – (04) Away Arm

The system will arm in the Away mode (see section 3.2). Enable

the Quick Arm feature (programming section [015], option [4])

to have this key function without the need to enter an access

code. If Quick Arm is not enabled, the user will have to enter an

access code before the system will away arm.

“Chime” – (06) Door Chime On / Off

The Door Chime feature will turn ON or OFF (see Section 3.4 –

“[

✱] [4] Door Chime”).

“Reset” – (14) Sensor Reset or [

✱] [7] [2]

The panel will activate all PGM outputs programmed as option

[03] Sensor Reset or [20] Command Output Option #2. (See

Section 3.4 – “[

✱] [7]Command Output Functions”).

“Exit” – (16) Activate Quick Exit

The panel will activate the Quick Exit feature (See Section 3.4 –

“[

✱] [0] Quick Exit”).

Additional Function Key Options

The programming of any function key on any keypad may be

changed to one of the options listed below. (See section 2.5,

“Keypad Enrollment” for instructions on changing function key

programming.) Each option is listed according to the

programming code, followed by the corresponding [

✱] key

command. For more information regarding each function, please

refer to the appropriate part of Section 3.4, “[

✱] Commands”.

[00] Null Key: The key is not used and will perform no function

when pressed.

[01]-[02] For Future Use

[03] Stay Arm: As described above.

[04] Away Arm: As described above.

[05] [

✱]

[9] No-Entry Delay Arm: A valid access code must

also be entered.

[06] [

✱]

[4] Door Chime On / Off: As described above.

[07] [

✱]

[6] [----] [4] System Test: A valid master code must

also be entered.

[08] [

✱]

[1] Bypass Mode: A valid access code may need to

be entered.

[09] [

✱]

[2] Trouble Display

[10] [✱]

[3] Alarm Memory

[11] [

✱]

[5] Programming Access Codes: A valid master

code must also be entered.

[12] [

✱]

[6] User Functions: A valid master code must also

be entered.

[13] [✱]

[7] [1] Command Output Option #1: A valid access

code must also be entered.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comentários a estes Manuais

Sem comentários

DSC Power608 Especificações Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DSC Power608