DSC PC6010 Manual de Instalação descarregar pdf (Página 45)

DELETE AREADELETE AREA

DELETE AREA

(1)(1)

(1)

COPY AREACOPY AREA

COPY AREA

(2)(2)

(2)

YES = The reporting of zone alarm will be delayed for the programmed time. If the system is

disarmed within this time, no alarm signal will be communicated. (See “Zone TX Delay”.)

NO = When an alarm occurs, the reporting code is transmitted immediately.

Alarm and Seismic Groups

You can assign multiple zones to one or more alarm groups (01-32). When a zone in an alarm group goes

into alarm, outputs programmed for the alarm group will be triggered. This allows you to program zones to

trigger outputs independently of their area assignments.

For this to work, you must assign the zone(s) to one or more groups in this section, and program the PGM

output for an alarm group (see “Programmable Output Options - Alarm Groups”).

In order for zones to be included in a Seismic Test, you need to assign each one to a seismic group (01-32).

Assign each zone to the same seismic group as the Seismic Pulse output that will test it. See “Programmable

Output Options - Seismic Pulse” for more information.

Area Label

Program a label for the area. See “Zone Label” programming for instructions.

NOTE: The maximum length of the area name label is 14 characters.

Delete/Copy Area

Disables an area.

If an area is deleted, the system will not erase any programming. If you decide to re-enable the area, the

programming will still be there. Only the zones will have to be assigned.

To delete an area, you must delete all zones that are assigned to the area. When selecting the Delete area

option, only areas that have no zones assigned to them will be displayed. If the Delete Area option is

selected, and there are no areas that are ready to be deleted, the message “No Areas Are Available” will be

displayed for three seconds.

Copies an area.

Copies the programming from one area to another one. This includes the Area ID Code, Area Toggles, and

the Area Times. The zone assignment is not copied.

Only areas that are active may be copied to other areas. To select an area to copy, the area must first be

active on the system. Once the area is selected it may only be copied to an area which is not currently active

on the system. If there are no areas that are not active, the message “No Areas Are Available” will be

displayed for three seconds.

ALARM GROUPSALARM GROUPS

ALARM GROUPS

(3)(3)

(3)

SEISMIC GROUPSSEISMIC GROUPS

SEISMIC GROUPS

(5)(5)

(5)

AREA SECTIONAREA SECTION

AREA SECTION

ADAD

D/D/

EDIT AREA EDIT AREA

EDIT AREA

ZONE ASSIGNMENT ZONE ASSIGNMENT

ZONE ASSIGNMENT

ALARM/SEISMIC GROUPSALARM/SEISMIC GROUPS

ALARM/SEISMIC GROUPS

AREA LABELAREA LABEL

AREA LABEL

(4)(4)

(4)

TX DELAY ?TX DELAY ?

TX DELAY ?

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Comentários a estes Manuais

Sem comentários

DSC PC6010 Manual de Instalação Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DSC PC6010