DSC PC6010 Manual de Instalação descarregar pdf (Página 44)

A 24 Hour Medical zone is armed at all times, and will create an alarm when violated if the Area is armed

or disarmed.

When armed, if violated, this zone type will generate an audible alarm on the area the zone is assigned to.

To have seismic zones tested during a Seismic Test, assign the zones to a seismic group (see “Seismic

Groups”). You should assign the zones to the same seismic group as the Seismic Pulse outputs that will

test them (see “Programmable Output Options - Seismic Pulse”).

NOTE: Seismic zones will log a Seismic Fault for physical faults (i.e. if the zone is shorted or opened).

“Links Supervisory” is used with the LINKS1000 cellular communications unit to monitor for LINKS1000

troubles. When the Links PGM output activates, a Links trouble will be logged on the event buffer and the

zone trouble transmitted.

NOTE: Do NOT use the Double EOL resistors with this zone type.

This zone type provides the LINKS1000 with a forced answer for downloading purposes.

NOTE: Do NOT use the Double EOL resistors with this zone type.

Zone Options

Enabling or disabling options by zone.

NOTE: Every time a new zone type is selected, the zone options for the selected zone will be set to a

default setting. The default setting will be different depending on the zone type selected. The defaults

for each zone type are shown below.

Zone Attribute Defaults (Y = Option ON; N = Option OFF):

Attribute:

ON Audible Steady Bypass Chime Tx. Delay

OFF Silent Pulsed No No No

Zone Type:

00 Standard Delay Y N Y Y N

01 Force Delay Y N Y N N

02 Aux. Delay Y N Y Y N

03 Instant Y N Y Y N

04 Interior Y N Y N N

05 24Hr Bell Y N Y N N

06 24Hr Bell/Buzz. Y N Y N N

07 24Hr Buzz. Y N Y N N

08 Stand. Fire Y Y Y N N

09 Auto Verify Fire Y Y Y N N

10 Momentary Arm Y N Y N N

11 Maintained Arm Y N Y N N

12 24hr Holdup N N Y N N

13 Auxiliary Y N Y N N

14 24hr Auxiliary Y N Y N N

15 24hr Medical Y N Y N N

16 Seismic Y N Y N N

17 LINKS Supervisory N N Y N N

18 LINKS Answer N N Y N N

YES = An alarm causes the bell output to activate.

NO = Silent alarm.

YES = The bell output will pulse when the zone is in alarm.

NO = The bell output will be steady when the zone is in alarm.

YES = The zone may be manually bypassed.

NO = The zone cannot be bypassed.

YES = Every keypad on the area will chime both when the zone is violated and when the

zone is then secured. The area must be disarmed for the chime option to function.

NO = The zone will not chime the keypads.

ZONE OPTIONSZONE OPTIONS

ZONE OPTIONS

(2)(2)

(2)

BELL AUDIBLEBELL AUDIBLE

BELL AUDIBLE

BELL PULSEDBELL PULSED

BELL PULSED

BYPASS ENABLEDBYPASS ENABLED

BYPASS ENABLED

CHIME FUNCTIONCHIME FUNCTION

CHIME FUNCTION

24HR MEDICAL24HR MEDICAL

24HR MEDICAL

(15)(15)

(15)

SEISMICSEISMIC

SEISMIC

(16)(16)

(16)

AREA SECTIONAREA SECTION

AREA SECTION

ADD/EDIT AREA ADD/EDIT AREA

ADD/EDIT AREA

ZONE ASSIGNMENT ZONE ASSIGNMENT

ZONE ASSIGNMENT

ZONE TYPEZONE TYPE

ZONE TYPE

AREA SECTIONAREA SECTION

AREA SECTION

ADD/EDIT AREA ADD/EDIT AREA

ADD/EDIT AREA

ZONE ASSIGNMENT ZONE ASSIGNMENT

ZONE ASSIGNMENT

ZONE OPTIONSZONE OPTIONS

ZONE OPTIONS

LINKS SUPERVISORYLINKS SUPERVISORY

LINKS SUPERVISORY

(17)(17)

(17)

LINKS ANSWERLINKS ANSWER

LINKS ANSWER

(18)(18)

(18)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Comentários a estes Manuais

Sem comentários

DSC PC6010 Manual de Instalação Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DSC PC6010