DSC Classic PC580 Manual de Instruções

InstructionManualSecurity ProductsTM© 1998 Digital Security Controls Ltd.1645 Flint Road, Downsview, Ontario, Canada M3J 2J6Printed in Canada 290027

10Zone BypassingThe zone bypassing function is used when access is needed to part of the protected area while thesystem is armed. Zones which are temp

11Viewing Trouble ConditionsThe control panel continuously monitors a number of possible trouble conditions. If one of thesetrouble conditions occur,

12Setting the System Date and TimeTo set the system time, enter [✱] [6] followed by the Master Code. Press [1]. The keypad will nowaccept 10 consecuti

13Door Chime FeatureThe door chime feature is used to provide a tone from the keypad each time a door or window isopened or closed. The doors and wind

14Household Fire Safety AuditMost fires occur in the home. To minimize this danger, we recommend that a household fire safetyaudit be conducted and a

15MaintenanceWith normal use, the system requires minimum maintenance. The following points should be observed.1.Do not wash the security station with

16FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void yourauthority to use t

InstructionManualSecurity ProductsTM© 1998 Digital Security Controls Ltd.1645 Flint Road, Downsview, Ontario, Canada M3J 2J6Printed in Canada 290027

1About Your Security SystemYour DSC security equipment has been designed to provide you with the greatest possible flexibilityand convenience. Read th

2System InformationFill out the following information for future reference and store this manual in a safe place.Access CodesYour Master Code is: ____

3Access CodesAccess Codes are used to arm and disarm the system. There are 33 access codes available: oneMaster Code and 32 access codes.Only the Mast

4Alternate Arming MethodsAway ArmingArming the system in the Away mode will have all interior zones and perimeter zones active. If motionis detected i

5Disarming the SystemDisarming from an LED Keypad:Enter the premises through a designated Exit/Entry door; entering by any other door will sound animm

6If An Alarm SoundsFire AlarmIf your system has been installed with fire detectors and the alarm sounds in a pulsing mode, followyour emergency evacua

7Programming codes from an LCD Keypad:Master CodePress the [✱] key to enter the function list. Scroll (< >) to...Press [5] or [✱]. The display w

The Liquid Crystal Display (LCD) displaysprompts and system information on two 16character lines.If “< >” appears, more information can beaccess