DSC PC 5010 Especificações descarregar pdf (Página 20)

K E Y P A D C O M M A N D S

[14] - [✱]+[7]+[2] Smoke Detector Reset

This function key provides the user with a simple method for activating a PGM output programmed as

either option [03] Sensor Reset or [20] Command Output option 2.

[15] - General Voice Prompt Help

This feature can only be programmed if both the Escort5580 and the PC5928 Audio Matrix module are

being used.

When the function key is pressed, the intercoms will perform a Help page. The user must then press the

Page/Answer button on any intercom station to begin the help session with the Escort.

For more information, please refer to the PC5928 Installation Manual.

[16] - [✱]+[0] Quick Exit

Same as described in Function Keys - Section 3.5.

[17] - [✱]+[1] Reactivate Stay/Away Zones

This function key provides the user with a simple method for adding Stay/Away zones back into the

system at night-time

(See Section 3.4 “[

✱

] Commands, [

✱

] [1] Reactivate Stay/Away zones”)

[18] Identified Voice Prompt Help

This feature can only be programmed if both the Escort5580 and the PC5928 Audio Matrix module are

being used.

When the function key is pressed, the Escort will begin a help session from the intercom station

programmed as closest to the keypad. In order for this option to function, you must program PC5928

Section [802], subsection [14] “Keypad Port Assignments.” For more information, please refer to the

PC5928 Installation Manual.

Note: This function key cannot be programmed for PC55XXZ LED keypads with software version 1.0.

[19] - [✱]+[2]+[3] Command Output 3

[21] - [✱]+[2]+[4] Command Output 4

Function Keys [19] and [21] provide the user with a simple method of activating an output programmed

as Command Output Option 3 or 4.

3.6 Global and Partition Keypad Operation

A global keypad will not display any information (the trouble LED will light if a trouble condition is present)

until a partition is selected. To select a partition the user must press and hold the [1] key for Partition 1 or

the [2] key for Partition 2 for two seconds. The keypad will then display the status of the selected partition

and allow normal operation.

A Partition keypad will display the status of the Partition for which it has been programmed. A user with

access to both partitions may temporarily assign the keypad to the other partition to gain access. To do

this the user must first press and hold the [#] key for two seconds. The keypad will go blank. The user

must then press and hold the [1] key for Partition 1 or the [2] key for Partition 2 for two seconds. The

keypad will then display the status of the selected partition and allow normal access.

3.7 Features Available for the LCD5500Z

These features are only available for LCD5500Z keypads with zone inputs:

Automatic Scrolling of Alarms in Memory

The LCD5500Z keypad allows automatic scrolling through alarms in memory while the keypad is idle. This

feature, if enabled, will override the clock display. This option can be programmed in LCD programming

section [66], option [4].

24 Hour Time Display Option

The LCD5500Z can be programmed to display time using a 24- hour clock, instead of a 12-hour, a.m./

p.m. clock. This option can be programmed in LCD programming section [66], option [3].

Keypad Zones

See section 2.10 “Keypad Zones”.

Viewing Troubles While Armed

See section 3.4 “[✱][2] Trouble Display” for information on how to view troubles.

Backlighting Boost (available for all zone input keypads)

The LCD5500Z and PC55XXZ zone input keypads will provide extra number pad lighting when any key is

pressed. The backlighting boost will last for an additional 30 seconds after the last keypress.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comentários a estes Manuais

Sem comentários

DSC PC 5010 Especificações Página 20

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DSC PC 5010