15
System Test
The system’s Bell Output (2s), Keypad Lights and Communicator are tested. This test will also measure
the panel’s standby battery.
Auto-Arm/Disarm Control
Pressing Auto-Arm while in the User Function menu will enable (three beeps) or disable (one long
beep) the Auto-Arm and Auto-Disarm feature, by partition. With this feature enabled, the panel will
automatically arm in the Away mode (Stay/Away zones active) or disarm at the same time each day.
The Auto-Arm time is programmed with the Auto-Arm time button. Auto-Disarm must be programmed
by the system installer.
User Call-up
If enabled by the installer, the panel will make 1 attempt to call the downloading computer. The down-
loading computer must be waiting for the panel to call before downloading can be performed.
Keypad Configuration
Figure 13 - Keypad Configuration
Backlight – sets the brightness and screen timeout of the Touchscreen.
Buzzer Control – sets the buzzer volume of the Touchscreen.
Picture Frame – selects the pictures that will be displayed on the slideshow.
Calibration – calibrates the Touchscreen.
Clock Mode – displays the digital clock if there is no activity for 30 seconds.
Comentários a estes Manuais