DSC PowerSeries PC1864 Guia de Instalação descarregar pdf (Página 16)

PowerSeries - PC1616/PC1832/PC1864

Section [017] Fifth System Option Code

Section [018] Sixth System Option Code

Section [019] Seventh System Option Code

For Future Use

[5] ON: keypad backlighting enabled. OFF: keypad backlighting disabled.

[6] ON: the system temporarily enables the Keypad Blanking feature if an AC failure is detected (to preserve the back up battery).

OFF: the system will operate as normal.

[7] ON: the keypad turns ON the Bypass light if zones are bypassed while the system is armed. OFF: the Bypass light turns OFF when

the system is armed.

[8] ON: the system supervises keypad tampers. OFF: the system does not supervise keypad tampers.

Option Description

[1] ON: the system does NOT associate wireless keys to user codes. OFF: the system will assign user code 17 to wireless key #01,

user code 18 to wireless key #02 etc. If the wireless key is used to arm or disarm, the system will report the Opening or Closing for

the associated User Code.

[2] ON: the system generates an RF Jam trouble condition if the condition is present for 5 minutes. OFF: the system generates the

trouble condition after 30 seconds.

[3] ON: the keypads beep if an RF Jam trouble is detected. OFF: the trouble is not annunciated via the keypad buzzer.

[4] ON: the Double Hit feature will be enabled. Two violations from the same zone within the Cross Zone Timer will be considered a

valid Police Code or Cross Zone event. The system will report the event and log it to the event buffer.

OFF: two alarms from the same zone is not a valid Police Code or Cross Zone event.

[5] ON: the system logs and communicates a Late-To-Close event when it auto-arms at the programmed time (not if auto arming was

caused by the No-Activity Arming feature). OFF: the system does not transmit or log a Late-To-Close event.

[6] ON: enables the Daylight Savings automatic clock adjustment feature. OFF: the system does not automatically adjust the clock for

Daylight Savings.

[7] For Future Use

[8] ON: the system only squawks the bell output when the system is armed in the Away mode. OFF: the system squawks the siren

when the system is armed in any mode. (See Section [14]).

Option Description

[1] ON: the system only transmits a Test Transmission reporting code if no other event was transmitted to the central station during the

programmed time. OFF the system always transmits a Test Transmission reporting code as programmed.

[2]-[4] For Future Use

[5] ON: the keypad buzzer follows the bell output for all alarms. OFF: the system only activates the bell output for all alarms.

[6] ON: When an alarm is detected on a zone (with the Cross Zone attribute enabled), a timer is started. The alarm is not transmitted and

the bell output is not activated unless a second cross zone enabled zone is violated before the Cross Zone timer times out. OFF: the

system reports all alarms normally and logs and transmits a Police Code reporting code if a second zone alarm is detected during the

armed period.

[7] ON: the system restarts the Exit Delay (one time) if a Delay zone is violated and restored during the exit delay time. OFF: exit

delay does not restart.

[8] ON: the system activates the trouble beeps when an AC trouble is detected. OFF: the system does not annunciate AC troubles

using the keypad buzzer.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Sem comentários

DSC PowerSeries PC1864 Guia de Instalação Página 16