DSC PK5590CL Guia do Utilizador

PK5590CL Touch ScreenSecurity Interface Compatible with PowerSeries Control PanelsUser GuideIMPORTANT This manual contains information on the limitati

8Away Arm When Away Arm is Selected:NOTE: If Quick Arm is not enabled by the installer, then a numerical keypad will be dis-played. Enter a valid acce

9BypassThe Bypass screen displays the Zone Number and StatusNOTE: If an Access Code is required to bypass zones• A numeric keypad is displayed• Enter

10Function screenAllows the user to select any of four predefined functionsNOTE: These functions must be configured by your Installer to Take effect.F

11Clean Mode The Clean Mode allows the user to touch (i.e., clean) the screen without enabling or disabling any functions. The screen will remain in t

12Time/DateThis screen allows the User to Change Date and Time.Enter: Hour - Tap < icon to decrease value, tap > icon to increase valueMinute

13User Codes/MenuThis screen allows you to Enable or Disable a User, or Delete a UserSelecting Access Codes will display a numeric keypad• Enter your

29007222R002©DSC 2007 Printed in Canada FCC Compliance StatementCaution: Changes or modifications not expressly approved by Digital Security Controlsc

INDEX...Page QUICK REFERENCEAccess Codes ...13Arming... Away ...8... St

11. IntroductionThe PK5590CL Touch Screen is an interactive touch-sensitive color LCD that can be used on Partition 1 of any PowerSeries control panel

2Controls & IndicatorsThe following table lists the Led Indicator and push button functions. Most operations are performed by tapping an area indi

3Figure 1, Controls & IndicatorsContext Sensitive HelpTitle BarWork AreaTimeLED Status IndicatorsDateFire Auxiliary PanicEMERGENCY BUTTONSStatus B

4LCD Touch Screen Welcome screenThe Touch Screen LCD is 1/4 VGA 320 x 240 pixel displayThis screen will blank after 15 minutes of inactivity. Tapping

5Figure 2, Touch Screen FlowchartSettings (2)ScreenClean ModeScreenTime/DateScreenUser CodesScreenLogsScreenSettings (1)ScreenFunctionsScreenSettingsC

6Main Menu screen The Main Menu screen allows you to select the following functions. To select a function tap on the associated virtual push button.No

7Stay Armed When Stay Arm is Selected:NOTE: If Quick arm is not enabled by the installer, then a numerical keypad will be dis-played. Enter a valid a