DSC PC560 Especificações descarregar pdf (Página 12)

Resetting Programming to the Factory Default Settings

The system may be reset to its factory default programming by following this procedure:

1 Remove all power, AC and battery, from the PC560

2 Remove all wiring connections from the PGM and Zone 1 terminals

3 Connect the PGM and Zone 1 terminals together

4 Apply power to the PC560 and wait for 10 seconds

5 After approximately 10 seconds, the keypad sounder will beep and Zone Light 1 will come ON

6 Remove all power, AC and battery, from the PC560

7 Remove the connection between the PGM and Zone 1 terminals

8 Re-connect original wiring to the PGM and Zone 1 terminals

9 Restore power to the PC560; the Programming Sections have now been restored to the factory

default settings

WWW.DIYALARMFORUM.COM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Sem comentários

DSC PC560 Especificações Página 12