6
3.2 Making an Ethernet Crossover Cable
An Ethernet crossover cable can be made by taking a standard Ethernet
cable (which will have wires attached to pins 1, 2, 3 and 6 only on the 8
pin RJ-45 connector) and swapping pin 1 with pin 3, and also swapping
pin 2 with pin 6, on one end of the cable only. This effectively reverses
the transmit and receive pairs, and allows two hosts to communicate
without the use of a network hub.
3.3 Call Direction
The call direction options of the panels are fully compatible with the
T-Link module. For example, if telephone number one is programmed
for the T-Link and network communication is lost, the panel will use the
backup telephone number to send the information to the central sta-
tion. The communication format is telephone number-specific and
therefore the land line communication format can be different from the
T-Link’s SIA format.
3.4 Port Usage Table
NOTE: Please confirm with the network administrator that the following
ports are locked open and that the PC running The Reporter IP has network
access for all required network segments.
Description
Default
Port #
Programming Location to Change
T- L i n k
T-Link Source Port 3060 Section [007] T-Link options from Keypad
T-Link Destination Port 3061 Section [008] T-Link options from Keypad
The Reporter IP T-Link Port 3061 Configuration menu
DLS Port 3062 Configuration menu
SA Port 3063 Configuration menu
DRL-IP T-Link Port 3061 Section [0B] [0C] from Console S/W
DLS Port 3062 Section [0D] [0E] from Console S/W
SA Port 3063 Section [11] [12] from Console S/W
Console S/W Port 3060 Section [14] [15] from Console S/W
DLS-3 DLS Port 3062 Modem Configuration Options
DLS SA SA Port 3063 Modem Configuration Options
7
Before You Get Started
You will need to obtain the following information from the Network Adminis-
trator for the LAN/WAN on which you are installing T-Link communication.
3.5 Network Address Worksheet
3.5.1 Receiver Line Cards
3.5.2 PC#1 (The Reporter IP)
3.5.3 PC#2 (DLS/SA)
3.5.4 PC#3 (DLS/SA)
3.5.5 T-Link Accounts
Line Card Static IP
Subnet Mask
Receiver
Receiver #
Receiver Line #
Default: 000.000.000.000 000.000.000.000 000.000.000.000 00 000
DRL IP #1
DRL IP #2
DRL IP #3
DRL IP #4
DRL IP #5
DRL IP #6
DRL IP #7
DRL IP #8
DRL IP #9
DRL IP #10
DRL IP #11
DRL IP #12
DRL IP #13
DRL IP #14
DRL IP #15
PC Network
Name
Static IP Address Subnet Mask Network Location
Receiver
Number
Line
Number
(Enter name here) (000.000.000.000) (000.000.000.000) (Enter location here) (02) (001)
PC Network
Name
Network Location
(Enter name here) (Enter location here)
PC Network
Name
Network Location
(Enter name here) (Enter location here)
Line Card
Module #
Static IP
Address
Subnet Mask
Panel
Account #
Receiver IP T-Link Gateway
Default: 000.000.000.000 000.000.000.000 AAAA 000.000.000.000 000.000.000.000
T-Link #001
T-Link #002
T-Link #003
T-Link #004
T-Link #005
T-Link #xxx
T-Link #xxx
T-Link #255
(7 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais