DSC NT9005 V1.0 Especificações descarregar pdf (Página 21)

[338] Misc. Tamper Codes

These codes are sent to the Tamper Alarm and Restorals Call Direc-

tion Group programmed in section [363].

I_3_I_7_I General System Tamper

This code is sent when a tamper exists on the main panel or

a module. This code is sent in addition to the specific tamper.

I_3_I_7_I General System Tamper Restoral

I_2_I_1_I Keypad Lockout - This code is sent when the

system enters keypad lockout.

[339]-[347] Closing(Arming)/Opening Reporting Codes

These codes are sent to the Opening and Closing Call Direction

Group programmed in section [365].

Access Closing Opening

Code Section/Entry Section/Entry

01 [339] I_A_I_2_I [344] I_A_I_2_I

02 I_A_I_2_I I_A_I_2_I

03 I_A_I_2_I I_A_I_2_I

04 I_A_I_2_I I_A_I_2_I

05 I_A_I_2_I I_A_I_2_I

06 I_A_I_2_I I_A_I_2_I

07 I_A_I_2_I I_A_I_2_I

08 I_A_I_2_I I_A_I_2_I

09 [340] I_A_I_2_I [345] I_A_I_2_I

10 I_A_I_2_I I_A_I_2_I

11 I_A_I_2_I I_A_I_2_I

12 I_A_I_2_I I_A_I_2_I

13 I_A_I_2_I I_A_I_2_I

14 I_A_I_2_I I_A_I_2_I

15 I_A_I_2_I I_A_I_2_I

16 I_A_I_2_I I_A_I_2_I

17 [341] I_A_I_2_I [346] I_A_I_2_I

18 I_A_I_2_I I_A_I_2_I

19 I_A_I_2_I I_A_I_2_I

20 I_A_I_2_I I_A_I_2_I

21 I_A_I_2_I I_A_I_2_I

22 I_A_I_2_I I_A_I_2_I

23 I_A_I_2_I I_A_I_2_I

24 I_A_I_2_I I_A_I_2_I

25 [342] I_A_I_2_I [347] I_A_I_2_I

26 I_A_I_2_I I_A_I_2_I

27 I_A_I_2_I I_A_I_2_I

28 I_A_I_2_I I_A_I_2_I

29 I_A_I_2_I I_A_I_2_I

30 I_A_I_2_I I_A_I_2_I

31 I_A_I_2_I I_A_I_2_I

32 I_A_I_2_I I_A_I_2_I

3-3 [*] Functions

[*][7] Command Outputs [*][7][1-4]

See section [141] to [154] PGM Output Attributes. When

any of the four [*][7] outputs are activated, six acknowledg-

ment beeps are heard. These functions can be performed

when the system is armed or disarmed.

☞

When this command is executed, all outputs pro-

grammed as this type will be active. If multiple out-

puts are programmed as the same type, the PGM

options must be programmed the same.

1 Command Output #1 - This function is user-con-

trolled. This can be performed when a programma-

ble output is programmed as type [19]. This output

can be used for operating devices such as garage

door opener, special lighting or door strikes.

2 Command Output #2 - This function is user-con-

trolled. This function can be performed when a pro-

grammable output is programmed as type [20]. Type

[20] may be used for operating devices such as

garage door openers, special lighting or door strikes.

3 Command Output #3 - This function is user-con-

trolled. This function can be performed when a pro-

grammable output is programmed as type [21]. This

output can be used for operating devices such as

garage door opener, special lighting or door strikes.

4 Command Output #4 - This function is user-con-

trolled. This function can be performed when a pro-

grammable output is programmed as type [22]. This

output can be used for operating devices such as

garage door opener, special lighting or door strikes.

[*][8] Flash/Advanced Programming

Enter [*][8][Installer Code][1] to enter Flash Programming.

See Flash Programming for Details

Enter [*][8][Installer Code][2] to enter Advanced Program-

ming. See Chapter 5: Advanced Programming for Details

☞

The system must be disarmed to enter program-

ming.

[*][9] Arming without Entry Delay

When Disarmed, entering [*][9] or pressing a function key

programmed for No Entry Arm before entering an access code

arms the panel without any entry delay on the delay zones and

bypasses zones that are defined as Stay/Away. This command

is used to arm the system while at home. When the system is

armed in this mode, the Armed light will flash and the Bypass

light will be on to indicate the Stay/Away zones are

bypassed. Once the panel is armed in this mode, using [*][1]

will remove the bypass from the Stay/Away zones if they

were NOT manually bypassed. The [*][1] command used here

only removes the bypass from zones that have been automati-

cally bypassed with the [*][9] command.

When Armed, entering [*][9] will toggle the entry delay on

and off. This will function when armed in Stay or Away

modes, as well as when the system is [*][9] armed. If the

panel is already [*][9] armed and [*][9] is pressed, the Armed

light will stop flashing, and the panel will log Armed with

Entry. If [*][9] is pressed while armed in Stay or Away modes,

the Armed light will flash, and the panel will log Armed with

No Entry.

WWW.DIYALARMFORUM.COM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

WWW.DIYALARMFORUM.COM 1

Comentários a estes Manuais

Sem comentários

DSC NT9005 V1.0 Especificações Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DSC NT9005 V1.0